← ALL PRODUCTS

Operator & Vehicle Monitoring

Everyday checks, made automatic.

Plenty of serious incidents start with something small: a tired driver, an unbuckled seatbelt, a handbrake left off, a passenger still on board, a load that’s started to shift. Procedures and pre-starts help, but they rely on people remembering every time. The products below run those checks automatically. They alert the driver and log the event, and on some vehicles they can step in as well.

Forklift operator monitored by an EDMS in-cab camera
EDMS logo

EDMS - Driver Monitoring System

EDMS adds a small in-cab camera to compatible ECAM and EPAS systems and watches the operator while the vehicle’s in use. It picks up fatigue, distraction, phone use, smoking and drinking, alerts the driver, and records the event so supervisors can review it later.

  • Runs on your ECAM or EPAS system, with no separate platform needed
  • Choose which behaviours to monitor, and adjust sensitivity and timers
  • Logged events help supervisors spot repeat behaviour over time

Download EDMS brochureEnquire

Forklift with EROLL handbrake and seat monitoring
EROLL logo

EROLL - Vehicle Roll-Away Prevention System

EROLL checks that the parking brake is on when the operator leaves the seat. If it isn’t, the system can sound a warning or apply the brake itself. It’s a backstop for the times when the procedure gets missed.

  • Monitors handbrake status and whether the driver is in the seat
  • Alert-only, or automatic braking as an engineering control
  • Suits a wide range of industrial and commercial vehicles

Download EROLL brochureEnquire

Forklift operator with EBELT seatbelt monitoring
EBELT logo

EBELT - Seatbelt Fastened Monitor

A seatbelt only works if it’s done up. EBELT confirms the operator’s belt is fastened before the vehicle moves off. On passenger vehicles, it can check every seat. On forklifts, it fits into the normal seating sequence, so the belt goes on before the truck moves.

  • Operator and passenger belt monitoring, from forklifts to commuter vans and buses
  • Warning only, or automatic braking on suitable vehicles
  • Set up around the vehicle’s seating layout

Download EBELT brochureEnquire

ESEAT flagging an occupied seat in a passenger vehicle
ESEAT logo

ESEAT - Passenger Remaining System

At the end of a run, ESEAT checks whether any seat is still occupied and prompts the driver to look again before locking up. The driver still does the walk-through, and the system backs it up.

  • Flags any seat still occupied after unloading
  • Suits everything from small commuter vans to large buses
  • Configured around how your passengers get off

Download ESEAT brochureEnquire

ELOAD in-cab display warning of load movement
ELOAD logo

ELOAD - Load Movement Detection System

ELOAD uses a truck-mounted 3D camera to watch the load on a truck or flatbed trailer while it’s moving. The camera moves with the vehicle, so a secured load stays still in its view. If the load shifts sideways past a set threshold, the driver gets an alert in the cab and can stop and check the restraints.

  • Thresholds tuned to ignore normal bumps, vibration and cornering
  • Processing on the vehicle, so it doesn’t depend on mobile coverage
  • Alerts are recorded, with remote access through Ecloud

Download ELOAD brochureEnquire

Not sure which system suits your site?

Tell us about your vehicles and your site, and we’ll suggest what’s worth fitting.

Enquire or call 1300 762 911

Request the Product Catalogue

← Back to all products